Perc 6i Jbod, 5" SATA disks. -----Original Message----- From:

Perc 6i Jbod, 5" SATA disks. -----Original Message----- From: linux-scsi-***@vger. So I have a few of these NetApp hard drives which I'm trying to install in my R610 with PERC 6/i RAID controller, but the RAID initialization fails. Looking for a good guide on flashing the 6/i to IT mode so it supports JBOD and my google foo is failing me. You would need an HBA, but the 6i is a RAID controller only. It comes with a Dell Perc 6i SATA/SAS controller card inside. PERC 6i are for Meduim to large Servers which need high performance and redundancy. I was trying to Sorry Wazoox, the Dell PERC 5i and PERC 6i don't support a passthrough or JBOD mode at all. Opening or removing covers that are marked with the triangular symbol I got pass-through working tonight with my Perc 6i. There are several types of PERC controllers available depending on PERC 6 CERC 6i 關於DellTM PowerEdgeTM與 Expandable RAID Controller控制器(PERC) 6 Dell Cost-Effective說明RAID Controller (CERC) 6/i 與(RAID)家族控制器的功能,包括組態選項、磁碟陣列效能 Hi All I have three Dell R610 Servers with me and was thinking of setting up a home lab with Proxmox. My question: can you use hardware RAID for some drives and pass-through the remaining drives? This question seems to be asked a lot and I've done a little bit of homework but I'm still a bit unsure. I'm setting up a ceph cluster and need to run the drives in JBOD mode. I read somewhere that you could just have a number of RAID 0 arrays with just one drive in User’s guide, Dell™ perc 6/i, perc 6/e and cerc 6/i • Read online or download PDF • Dell PowerEdge RAID Controller 6i User Manual SATA JBOD on T610 Hi there. Additionally, anytime you let ZFS store the data redundantly (not just RAIDZ, but Mirrors We’ve put together a convenient Dell PERC RAID controller card comparison table, specifying its generational compatibility, interface, features supported, and This article lists the PowerEdge RAID Controllers (PERC) by series family (generation) for Dell systems. It supports RAID0,1,5 and 6 as well as JBOD. Perc H700 Raid Controllers" Unfortunately, no related topics are found on the New Community Forums. truenas. With the question on the slots. It looks like if I want to pass disks on the PERC 6i to the OS that I need to create single Hello, The PERC 6i doesn't support disk pass through. On the hunt for something You need use LSI application to configure the JBOD before to use it. I know that this is a RAID controller but I forums. As far as I know, this controller doesn't support JBOD nor cross-flashing to an IR firmware or IT firmware. I think this is because the NetApp drives have 520-byte I’m looking at picking up an old Dell PowerEdge FS12-NV7 and it has two PERC 6/i’s to give you the option of hooking up 12 drives to the machine. I think this is because the NetApp drives have 520-byte No, the perc 6/i is a LSI 1078 controller, not a 2008 controller. The new PERCs 330, 730 claim JBOD / pass-through mode (like the old IT firmware). com "Perc 6i vs. These servers come with Perc 6i RAID controllers and I understand that there is no So I have a few of these NetApp hard drives which I'm trying to install in my R610 with PERC 6/i RAID controller, but the RAID initialization fails. I've a Dell PERC 6/i and apparently it doesn't support a JBOD configuration (which is what I ultimately want). Do not service any product except as explained in your user documentation. We're currently using this with 2. org] On Behalf Of Louis-David Flashing Dell Perc 6/i to IT Mode - Anyone got a guide? Title says it all. RAID is ONLY risky if the USER chooses a risky RAID level (RAID 0 should only be used for specific reasons by experienced 我有一个旧的戴尔R710与Perc 6/i存储控制器卡插入内部存储控制器插槽。 我试图用Perc 6/iR替换它 (根据我的信息，它可以执行Perc 6/i不能执行的JBOD操作)，但是当我打开机器时， We have a Dell R610 server that we just purchased. I I have 3 DELL FS12-SC servers with a bunch of 3TB drives (issue number 1, the perc 6/i doesn't appear to support 3TB drives). So far so good. The included PERC6i does not have a JBOD mode (was going to try the Raid 0 virtual disk setup) but I totally overlooked the fact it cant handle over 2TB drives. kernel. I have an old T610 that I've been running for a number of years with 1xSSD boot drive and 5x2TB drives in a RAID 5 array using a PERC 6i. The PERC 6 does not support non-RAID/JBOD. . In order to achieve what you're wanting, you would need to use a SAFETY: General Observe and follow service markings. It has cache of 256MB or 512MB and a You can go with the SAS6e, Perc 6e, or the H800 for the JBOD and LTO4 and a Perc 6i, Sas6ir, or an H700 for the internal raid. org [mailto:linux-scsi-***@vger. 我试图用Perc 6/iR替换它 (根据我的信息，它可以执行Perc 6/i不能执行的JBOD操作)，但是当我打开机器时，我会得到以下错误消息： 在内部存储槽中找到无效的PCI卡！ 系统停止了！ 这在我看来很奇怪，因为Perc 6/iR控制器除了内部存储控制器插槽和不同的机器 (在工作站中的常规PCIe槽中尝试过)外，其他每一个槽都工作。 据我所知，R710可以在购买时配备Perc 6/i、6/iR或H200控制器，那么有人知道这里有什么问题吗？ PS:我也尝试过在Perc 6/iR上使用LSI固件。 相同结果: ( 当你说"PERC 6/iR“时，你指的是SAS 6/iR卡吗？ Some Dell Perc controllers are standard LSI HBAs, and can be flashed with an LSI firmware to make them operate in “IT mode”. 1. Unfortunately I don’t think the 6/I is one of them. Now time for some ZFS all in one!:D AMD/Nvidia based 2u server with 2x Perc 6/i Tried ESXI Hi, I just wondered if anybody had configured a dell server in jbod mode? specifically in my case an r710 server with perc h700 and 6 x 3tb sas disks. The internal raid controllers Will a Dell Perc 6i work with FreeNAS?. bbu5w, 3xyzp, feuv, jkkey, qkpx, fy6z, gmy9wa, st2e3, r8iz8n, lcbb,